Setting pin 0.50mm (for setting tool BERU / FMO)

Single adjusting pin for adjusting tool 90000037 for BERU /Federal Mogul industrial spark plugs for GE Jenbacher gas engines.

!!!ATTENTION!!! Maximum tightening torque: 20 Nm
Tightening torque > 20Nm may cause irreparable damage.

Use the 3-piece tool to optimize the ignition of your CHP gas engine.

Description of the adjustment process:

– Screw the spark plug holder into the vice
– Insert the setting pin between the center and earth electrodes of the spark plug
– Place the spark plug in the spark plug holder
– Insert the coupling nut over the spark plug and tighten it with up to 20 Nm
– Note: Tightening torque > 30Nm can lead to irreparable damage.